alpha300 RA

alpha300 RA – Combination of Chemical and Nanoscale Structural Imaging in one System

The well-established Raman-AFM combination alpha300 RA was the first integrated Raman AFM system on the market and continues to set the standard for combined instrument configurations for correlative Raman-AFM microscopy. The alpha300 RA incorporates the features of the Raman microscopy system alpha300 R for powerful chemical imaging along with Atomic Force Microscopy (alpha300 A) for high-resolution nanoscale surface characterization. Thus correlative Raman AFM imaging  facilitates a comprehensive understanding of the samples.

 

With the alpha300 RA the two complementary imaging techniques are available in a single instrument without compromise and are controlled by one software suite for the highest ease-of-use and reliability. Switching between the imaging techniques requires just a turn of the objective turret, with all imaging parameters automatically adjusted and the same sample area easily imaged with both techniques. The software also allows the effortless correlation of the Raman and AFM results and the image overlay.

 

The alpha300 RA is furthermore ideally suited fo TERS (high-resolution Raman) AFM measurements.

alpha300RA AFM Mode 024 neu

Key Features

  • All features of the alpha300 R (Raman) and the alpha300 A (AFM) instruments provided in one microscope
  • Excellent combination of comprehensive surface characterization on the nanometer scale (AFM) with chemical imaging (Raman)
  • Ideally suited for simultaneous Raman-AFM measurements
  • Strictly correlative: moving the sample between the measurements not necessary
  • Convenient switching between the measurement techniques by rotation of the objective turret

Application Examples

alpha300RA Raman AFM polymers

Combined Raman-AFM measurement of the same sample area of a multicomponent polymer blend consisting of a 1:1:1 mixture of polystyrene, SRB (styrene-butadiene-rubber) and EHA (ethylhexal acrylate).

Raman image (left): green = PS, red= SRB, blue = EHA.

alpha300RA Raman AFM paper

Confocal Raman AFM images of traces of wood extractives on cellulose fibers. From the Raman spectra the distribution of two phases of cellulose (green, blue) and of hexane extratives (red) were imaged. The AFM phase image (inlay) shows a clear structural distinction between cellulose and hexane extractives. Raman image area 20 μm x 40 μm, 80x160 pixels, integration time: 100 ms/spectrum.

alpha300RA Raman AFM stress in silicon

Correlative Raman-AFM microscopy of stress in silicon. Left: 10 μm x 10 μm AFM topography image and depth profile (bottom). Right: Corresponding Raman image revealing the stress areas in silicon.

 

alpha300RA Raman AFM lithography star spectrum

Confocal Raman image of the 1st order Si line (left) and the intensity profile along the cross section marked in blue (right).

Specifications

Raman General Operation Modes

  • Raman spectral imaging: acquisition of a complete Raman spectra at every image pixel
  • Planar (x-y-direction) and depth scans (z-direction) with manual sample positioning
  • Image stacks: 3D confocal Raman imaging
  • Time series
  • Single point Raman spectrum acquisition
  • Single-point depth profiling
  • Fibre-coupled UHTS spectrometer specifically designed for Raman microsopy and applications with low light intensities
  • Confocal Fluorescence Microscopy
  • Bright Field Microscopy

AFM General Operation Modes

  • Contact Mode
  • AC Mode (Intermittent Mode, Phase Imaging)
  • Digital Pulsed Force Mode (DPFM)
  • Lift Mode™
  • Magnetic Force Microscopy (MFM)
  • Electrostatic Force Microscopy (EFM)
  • Force Distance Curves
  • Nano-Manipulation/Lithography
  • Lateral Force Microscopy (LFM)
  • Kelvin Probe Microscopy
  • Chemical Force Microscopy (CFM)
  • Current Sensing Mode
  • others on request

 

Basic Microscope Features

  • Research grade optical microscope with 6x objective turret
  • Video system: video CCD camera
  • High sensitivity b/w video camera to view sample and AFM tip in transmission
  • LED white-light source for Köhler illumination of AFM tip and sample
  • Manual sample positioning in x- and y-direction, 25 mm travel
  • Fibre coupling
  • Sample size: 120 mm in x- and y-direction, 25 mm in height
  • Microscope base with active vibration isolation system

 

 

Raman Optional/Upgradable Operation modes

  • Additional lasers, several wavelenghts eligible
  • Additional UHTS-spectrometers (UV, VIS, NIR)
  • Automated, motorized sample positioning and measuring with piezo-driven scan stages, 25 mm travel range (50 mm travel range optional)
  • Automated confocal Raman imaging (25 x 25 mm²; optional 50 x 50 mm²)
  • Automated multi-area and multi-point measurements
  • Ultrafast Raman imaging (1300 spectra per second) optional available
  • Upgradable for epi-fluorescence applications
  • Adapter for higher samples 
  • TrueSurface for Raman depth profiling
  • Autofocus

 

Computer Interface

  • WITec software for instrument and measurement control, data evaluation and processing

TERS

WITec’s unique alpha300 RA microscope systems with Raman and AFM techniques combined in one instrument provide optimized instrumentation for TERS experiments.

The WITec TERS advantages

  • Unique integrated Raman-AFM technique from one source for reliable TERS experiments
  • Flexible sample illumination from either above, below, or from the side

Literature

  • Solutions for High-Resolution Confocal Raman Microscopy

    Open PDF
    (3.3 MB)
  • WITec alpha300 Brochure

    Open PDF
    (7.2 MB)
Go to literature area

Contact

Please fill in all data fields to ensure we can process your inquiry as quickly as possible.

Privacy Protection Statement:
WITec respects privacy of any personal information provided by visitors of our site. The personal information we collect from you within this contact form, will only be used to respond to your submitted query.